Weighing instrument panel, advanced tolerance checking etc.

Multifunction microcontroller/weight indicator, for use in industrial systems.
11 relays, 6 inputs, up to 3 serial outputs, 16 bit analogue output, Sysway transmission protocols, Modbus RTU and Profibus are some of the features of this indicator, which, added to the range of available application software programmes, allow for its use in dosage, control, and weight verification applications, with direct management of the automation.
Omologabile CE-M (OIML R-76 / EN 45501).

MAIN FEATURES

Easy to use 6-key waterproof keypad. Main semialphanumeric red LED display, highly efficient, with 6 digits 15 mm high. Secondary alphanumeric backlit LCD display with 2 lines of 16 char. each. Synoptic bar graph with 16 bright indication LEDs showing the active functions. Anodised aluminium case according to DIN standards, 193x97x140 mm, 187x91 mm perforation for mounting on a board. Time/date and permanent memory data also in case of mains power interruptions. Calibration and parameter Set-Up, configurable from PC with Dinitools or from keypad; theoretical calibration with entry of the characteristics of the load cells. Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d CE-M legal for trade. Up to displayable 1.000.000d for internal factory use. Up to 8 signal linearisation points with DINITOOLS. Internal resolution up to 3.000.000 points. A/D 24 bit sigma-delta 4-channel conversion, up to 200 conv./sec. with automatic selection; connectable with up to 8 analog load cells with 350 Ohm input resistance. Management up to 4 independent scales or digital equalisation of the 4 channels. Power supply from 8 Vdc to 40 Vdc and upon request, 100-240 Vac (with ALSW optional external power adapter). Connectable to printers and labellers through available driver commands.

I/O SECTION

RS232/C bidirectional port configurable for connection to printer, labeller, or other external units. RS232/C bidirectional port (optionally, RS485 or RS422) configurable for PC, PLC, or other external units. Third RS232/C serial port (optional, depending on the model), for connection to remote scale, barcode reader or repeater. 11 0.5A 48 Vac / 1A 24 Vdc relay outputs programmable as weight thresholds or for automation management (depending on the software application). 6 optoisolated inputs, configurable as remote function keys or for automation management (depending on the software application). Profibus output (optional, depending on the model), for remote management of the system.