Weighing indicator multi function with battery supply.

High performance and reliability at a competitive price. The DFWL digital weight indicator is versatile and easy to programme and use. The wide range of available functions and interfaces, make it suitable for many different kinds of industrial and commercial weghing applications. Suitable for pallet truck scales, fork lifts and automotive.
Standard fitted with a support bracket with adjustable inclination, for use on the table, column, or wall. CE-M approvable (OIML R-76 / EN 45501).

• 5-key functional waterproof keypad.
• Dimension box 172x96x70mm
• Backlit 25mm LCD display with 6 high contrast digits with icons for showing the active functions.
• Easy to clean ABS IP54 case, resistant to harsh and corrosive environments.
• Suitable for use on the table, column, or wall.
• Fitted with fixing bracket with adjustable inclination.
• A/D 24 bit, 4 channel converter, max. 200 conv./sec. autoselect, and up to 8 signal linearisation points. Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in the CE-M approved version for legal for trade use.
• Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
• Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
• Digital calibration and Set-Up from keypad or from PC through DINITOOLS.
• Power supply from 5 to 12Vdc.
• Supplied as standard with 4 AA batteries extractable drawer (batteries not included), and standard connector for external power adapter connection (if connected it excludes the battery supply).
• x 10 high resolution visualisation
• Net/Gross or lb/kg conversion
• Weights totalisation
• Formulation
• +/- Check
• Percentage weigh
• Alibi, for approved weight transmission (optional)
• Counting
• Input/Output
• Hold and Peak
• Peer-to-peer (up to 4 connectable remote indicators)
  
   
• RS232/C bidirectional port on RJ connector for quick connection (or USB as an extra option) or RS485, configurable for PC, PLC, additional remote display, or radio modem.
• RS232/C bidirectional port configurable for connection to printer or labeller.
• IR input for managing the remote control.

NOTE! Peak/Hold firmware must be ordered when ordering, it can't be added afterwards.

CALIBRATION VIDEO:                                                                           

ZERO CALIBRATION ONLY: