Load cell 2000 kg shear beam. Nickel-plated steel. IP67. OIML C3.

Dini Argeo nickel-plated approved load cells. The measures are compatible with the main shear beam load cells present on the market. They are suitable for creating CE-M approved scales with 4 load cells or for weighing conveyors, tanks and hoppers, thanks to their accessories. 

• CAPACITIES (kg): 500, 1000, 2000.
• OIML R60 approved, NTEP, ATEX 3GD.
• Nickel-plated steel. IP67 protection.

Main features:

• C3 PRECISION CLASS
• NIKEL-PLATED CONSTRUCTION
• POTTED SEAL, IP67 PROTECTION
• MAX. CAPACITIES FROM 500 TO 2000 kg
• SHIELDED CONNECTION CABLE
• TEST CERTIFICATE AVAILABLE UPON REQUEST

Technical features:

• Minimum load cell verification interval Vmin = EMax / 10.000
• Maximum number of verification intervals nLC = 3000
• Combined error 0,017% of Full Scale Output (F.S.)
• Nonlinearity ± 0.02% FS
• Hysteresis ± 0.02% FS
• Repeatability ± 0.01% FS
• Full Scale Output 2mV/V ± 0.5%
• Zero balance ± 1% FS
• Compensated Temperature Range -10°C/+50°C.
• Operating Temperature Range -20°C/+60°C.
• Creep error after 30 minutes <0,02% F.S.
• Maximum tolerated excitation voltage 15 Vdc
• Input Resistance 380 ± 20 Ohm
• Output Resistance 350 ± 5 Ohm
• Insulation Resistance >5000 MOhm
• Safe Overload 150% F.S.
• Ultimate Overload 300% F.S.
• 6-wire shielded cable, 3.5m long, 5 mm diameter

ATEX version:

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:ATEX II 3G Ex ic IIC T6 (Ta -20÷+65°C) Gc
• ATEX II 3G Ex nA IIC T6 (Ta -20÷+65°C) Gc
• ATEX II 3D Ex tc IIIC T85°C (Ta -20÷+65°C) Dc IP65.
• The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.