Load cell 200kg. OIML C6. Stainless steel.

Bending beam load cells for approved weighing, automatic systems, dosage.

Main Features:

• C6 precision class
• Stainless steel
• IP68 protection
• Max. Capacities from 20 to 200 kg
• Shielded connection cable
• OIML Certificate available upon request
• Test Certificate available upon request

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC= 6000
• Full Scale Output: 2mV/V +/- 0,1%
• Combined error: 0,008% of Full Scale Output (F.S.)
• Temperature effect on zero: +/- 0,0014% /°C
• Temperature effect on full scale output: +/- 0,0007% /°C
• Compensated Temperature Range: –10°C/+40°C
• Operating Temperature Range: –20°C/+60°C
• Creep error after 30 minutes +/- 0,012% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 385 ± 20 Ohm
• Output Resistance: 350 ± 5 Ohm
• Insulation Resistance: > 5000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 200% F.S.
• 4-wire shielded cable, 3m long.

ATEX Version:

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
  ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.