Load cell 250kg, stainless IP68.

Stainless steel compression load cells suitable for weighing tanks and hoppers with the relevant accessories.
Capacities (kg): 250, 500, 1000, 2500, 5000, 7500, 10000, 12500, 15000, 30000, 50000, 100000.
OIML R60, C3 precision class from 2500 to 12500kg.
Stainless steel. IP68 protection.

Main features:
Capacities from 250 to 100000 kg
CE-M C3 approved, from 2500 to 12500 kg
Low profile
Great resistance to lateral forces
Stainless steel construction
IP68 protection
Shielded connection cable

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10000
• Full Scale Output: 2mV/V +/- 0,5%
• Non-Repeatability: 0,01% F.S.
• Combined Error 0,05%
• Temperature effect on zero: 0,02% / 10°C
• Temperature effect on full scale output: 0,02% / 10°C
• Compensated Temperature Range: -10°C/+50°C
• Operating Temperature Range: -20°C/+60°C
• Creep error after 30 minutes: 0,02% F.S.
• Recommended excitation voltage: 10 Vdc
• Maximum tolerated excitation voltage: 15 Vdc
• Input Resistance: 750 ± 10 Ohm
• Output Resistance: 700 ± 5 Ohm
• Zero Balance: +/-1% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 120% F.S.
• 4-wire shielded cable, 5 mm diameter:
• - 5 m long for CPX 250...5000 versions;
• - 10 m long for CPX 7500...100000 versions.