Load cell 30 tonne double ended shear beam stainless, OIML

Stainless steel double shear beam load cells suitable for building, for example, to make CE-M approved scales for high capacities or for weighing tanks and hoppers with the relevant accessories. High accuracy also with the expansion of the weighing structures.

• C4 Precision class
• 17-4 PH stainless steel construction
• IP68 protection
• Max. capacities from 10000 to 30000 kg
• Shielded connection cable
• TEST certificate available upon request

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Combined error 0,03% of Full Scale Output (F.S.)
• Full Scale Output: 2mV/V +/- 0,1%
• Temperature effect on zero: 0,00116% /°C
• Temperature effect on full scale output: 0,00097% /°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -30°C/+85°C
• Creep error after 30 minutes: <0,02% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 700 ± 7 Ohm
• Output Resistance: 700 ± 7 Ohm
• Zero Balance: +/- 1% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• 6-wire shielded cable, 15m long