Load cell 50kg. OIML C3. Stainless. Atex

Bending beam load cells for approved weighing, automatic systems, dosage.

• C3 Precision class
• Stainless steel
• IP68 Protection
• Max. Capacities from 100 to 500 kg
• Shielded connection cable
• OIML Certificate available upon request
• Test Certificate available upon request

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC= 3000
• Full Scale Output: 2.0 ± 0,002mV/V
• Combined error: 0,017% of Full Scale Output (F.S.)
• Non-Repeatability: 0,015% F.S.
• Temperature effect on zero: +/- 0,02% F.S. / 10°C
• Temperature effect on full scale output: +/- 0,02% F.S. / 10°C
• Compensated Temperature Range: –10°C/+40°C
• Operating Temperature Range: –30°C/+70°C
• Creep error after 30 minutes +/- 0,016% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 400 ± 20 Ohm
• Output Resistance: 352 ± 3 Ohm
• Insulation Resistance: > 5000 MOhm
• Safe Overload: 120% F.S.
• Ultimate Overload: 150% F.S.
• Nominal displacement: < 0,4 mm
• 4-wire shielded cable, 3m long, 5mm diameter.