Load cell tension 500kg, stainless steel IP67, ATEX

Tension or Compression approved load cells for the weighing hoppers, tanks, scales with levers, and with other weighing devices. 

• C3 Precision class
• 17-4 PH stainless steel construction
• IP67 protection
• Max. Capacities from 100 to 1000 kg
• Shielded connection cable
• TEST certificate available upon request

Technical features:

• Minimum load cell verification interval: 
• Vmin = EMax / 10.000 (for STG500 and STG1000 model);
• Vmin = EMax / 7.000 (for STG100 model)
• Maximum number of verification intervals: nLC = 3000
• Combined error 0,03% of Full Scale Output (F.S.)
• Non-Repeatability: 0,01% F.S.
• Full Scale Output: 3mV/V +/- 0,08%
• Temperature effect on zero: 0,017% /°C
• Temperature effect on full scale output: 0,014% /°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -35°C/+65°C
• Creep error after 30 minutes: 0,02% F.S.
• Maximum tolerated excitation voltage: 18 VDC
• Input Resistance: 430 ± 60 Ohm
• Output Resistance: 350 ± 3.5 Ohm
• Zero balance: +/-1% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• 4-wire shielded cable, 6m long, 5 mm diameter