Single point lastcell SPN 500kg. Aluminium. OIML C3, ATEX.

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell; maximum platform dimensions of 800x800 mm.

CAPACITIES (kg): 300, 500, 750.
OIML R60. C3 precision class.
Aluminium alloy. IP67 protection.

Main features:

• C3 PRECISION CLASS
• OFF CENTER LOAD COMPENSATED
• ALUMINIUM ALLOY CONSTRUCTION
• IP67 PROTECTION
• MAX. CAPACITIES FROM 300 TO 750 kg
• FOR PLATFORMS WITH DIMENSIONS UP TO 800 X 800 mm
• SHIELDED CONNECTION CABLE
• OIML CERTIFICATE AVAILABLE UPON REQUEST
• TEST CERTIFICATE AVAILABLE UPON REQUEST

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 15.000
• Maximum number of verification intervals: nLC = 3000
• Sensitivity: 2mV/V ± 10%
• Temperature effect on zero: 0,01% FS/10K
• Temperature effect on Full Span: 0,001% FS/10K
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: 0,01% F.S.
• Maximum excitation voltage without damage: 15 Vdc
• Input Resistance: 300..500 Ohm
• Output Resistance: 300..500 Ohm
• Insulation Resistance: >2000 MOhm
• Mechanical limit load in service: 150% F.S.
• Destructive load: 300% F.S.
• Deflection at nominal load: <0,5mm
• 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version:

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
  ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
• The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.