Single point lastcell SPSX 300 kg. Stainless steel IP67. OIML C3, ATEX.

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 600x800 mm.

CAPACITIES (kg): 100, 300, 500.
OIML R60. C3 precision class.
17-4 PH stainless steel. IP67 protection.

Main features:

• C3 PRECISION CLASS
• OFF CENTER LOAD COMPENSATED
• MADE IN 17-4 PH STAINLESS STEEL
• IP67 PROTECTION
• MAX. CAPACITIES FROM 100 TO 500 kg
• FOR PLATFORMS WITH DIMENSIONS UP TO 600 X 800 mm
• SHIELDED CONNECTION CABLE
• TEST CERTIFICATE AVAILABLE UPON REQUEST

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 15.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero: 0,01% FS/10K
• Temperature effect on full scale output: 0,001% FS/10K
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: ± 0,01% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 390 ± 15 Ohm
• Output Resistance: 359 ± 5 Ohm
• Insulation Resistance (100V) >1000 MOhm
• Safe Overload: 300% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version:

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
  ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
• The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.