Single point load cell SPSY 50kg. Stainless steel IP68/69K, OIML C3.

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 500x400 mm.
Capacities (kg): 10, 20, 50, 100.
OIML R60. C3 precision class.
17-4 PH stainless steel. IP68/IP69K protection.

Main features:

• C3 precision class
• Off center load compensated
• Made in 17-4 PH stainless steel
• IP68/IP69K protection
• Max. capacities from 10-100 kg.
• For platforms with dimensions up to 500x400 mm.
• Shielded connection cable
• Test certificate available upon request.

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero:
• ±0,014% F.S./10K
• Temperature effect on full scale output:
• ±0,0117% F.S./10K (-10°C/+20°C)
• ±0,0175% F.S./10K (+20°C/+40°C)
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: ± 0,01% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 380 ± 15 Ohm
• Output Resistance: 350 ± 10 Ohm
• Insulation Resistance (100V) >2000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter