Single point loadcell 100kg stainless IP68, C6

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 600x600 mm.

Main features

• C6 precision class
• Off center load compensated 
• Made in 17-4 PH stainless steel
• IP68 protection
• Max. capacities from 100 to 500 kg
• For platforms with dimensions up to 600 X 600 mm
• Shielded connection cable
• Test certificate available upon request

Technical features

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero: 0,0014% /°C
• Temperature effect on full scale output: 0,0013% /°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -30°C/+85°C
• Creep error after 4 hours: 0,03% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 382 ±10 Ohm
• Output Resistance: 350 ± 3 Ohm
• Zero Balance: +/-2% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.3 mm
• 6-wire shielded cable, 3m long, 5mm diameter