Weigh beams ATEX, 2pcs, 400x80x105 mm, 150kg/20g

Pair of sturdy and versatile modular weighing bars, easy to fit under any type of weighing structure. These are suitable for weighing rigid structures (hoppers, conveyor belts, roller units, tanks, crates, etc.). Standard version is with approved load cell.

• Functions with 4 IP68 stainless steel shear-beam approved load cells (BPL) and with 2 aluminium off-center approved load cells (BPS-BPM-BPX), made according to OIML R60 standards with protection against dust and water splashes according to IP65 standards (350 Ohm input resistance).
• The structure is made in section and sheet oven-fire painted carbon steel, fitted with articulated joints for compensating the bending and/or expansion of the structure to be weighed, and with stops for protection from accidental bumps.
• Shielded 3m long 4-pin cable for connecting each bar with the fitted junction box.
• Up to 15 Vdc power supply.
• IP67 hermetic equalised junction box with shielded 5m long 6-pin cable with connectors for connection to the indicator.
• The stainless steel model has the structure, and mechanics in AISI304 and the load cells are treated with an anticorrosion treatment.

Options for ATEX version:

• CCATEX: ATEX certificate for each load cell.
• JB4QA: ATEX certified junction box.
• DCATEXMECH: Declaration of conformity of the whole system composed of platform + junction box + load cells (only if the platform is ordered without the weight indicator; otherwise, refer to the certifications available for the indicator to which it will be connected).

Options only available at time of order:

• Connection to the indicator and calibration with CE-M 3000e single range or 3000e+3000e dual range approval (with indicators of our production).
• High resolution model for internal factory use.