Weighing indicator touch screen ATEX/IECE for zone 2/22. IP68 Stainless steel.

Weight indicator with a big touch screen display, for ATEX 2 & 22 hazardous zones. Suitable for advanced industrial applications, it's fitted with 3 serial ports, Ethernet communication port, configurable printouts and integrated alibi memory. CE-M approvable (OIML R-76 / EN 45501).
Ex colour Touch Screen indicator for zone 2/22 with AF01 software. IP68 stainless steel enclosure.

ATEX/IECEX marking:
II 3G Ex nR IIC T6 Gc X (0°C<= Ta <=50°C) for gases
II 3D Ex tc IIIC T85°C Dc IP65 X (0°C<= Ta <=50°C) for dust.

What's new:

• IECEx certification.
• New enclosure with screwless front closure for easy cleaning of the indicator.
• PG7 and PG9 cable glands with adapters for 4 to 7 mm and 7 to 10 mm cable routing. Equipped with anti-friction system that does not require additional external cable fixing, as required by the IECEx scheme and ATEX directives.
• Available in specific version for direct connection to load cells installed in zone 1/21 and 0/20.

Technical features

• 5,7' colour touch screen display.
• Multilanguage software.
• 15-key alphanumerical waterproof keyboard.
• 3-way control light.
• Selectable QWERTY, AZERTY or QWERTZ keyboard integrated in the touch screen.
• Stainless steel waterproof enclosure, with new IP68 protection system.
• Dimensions: 280x143x185mm.
• Suitable for use on the table, column or wall.
• Real time clock and permanent data storage.
• Alibi memory as standard, integrated on the motherboard.
• Slot for built-in micro SD to record the configuration, logos, and customized screens (upon request).
• Functions available with DINITOOLS utility
  - Configuration, data entry and print formatting.
  - Recording and filing of all the information on PC.
  - Complete retrieval of the configuration.
  - Instrument calibration with numeric values.
  - Customization of the screens.
• 24-bit A/D converter, 4 channels, up to 3200 conv./sec. with automatic frequency selection and up to 8 signal linearisation points.
• 4 independent analogue channels for weight reading (up to 2 in E-AF03 version).
• Connection with up to 16 analogue load cells of 350 Ohm (45 load cells of 1000 Ohm).
• Up to 10.000e OIML or multi-range 3 x 3000e @ 0,3 µV/d CE-M legal for trade.
• Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points.
• Connectable to printers and labellers with free programming of the printout formats.
• Power supply from 110-240Vac line or 12-24 Vdc Max. 25.2W

Complete programmablity for customised applications

• Thanks to the integrated development area, fully customised applications can be created independently:
  - Specific weighing softwares according to customer requirements
  - Tailor-made weighing softwares to replace terminals in existing installations
  - Wizards, messaging for the operator
  - Serial port management, protocol customization
  - Complete digital I/O management
  - Sequential or simultaneous automations
  - Data entry, tailor-made archives

Dini Argeo also offers the service of software development (to be quoted).

Standard application

• AF01: Totalization and formula weighing (standard)
• AF02: Piece/quantity counting (optional)
• AF03: Weighbridges - Vehicle In/Out (optional)
• AF04: Statistical check of prepackaged goods (optional)
• AF05: Price computing and industrial labelling (optional)
• AF08: Static wheel and axle weighing with 2 or more pads (optional)
• AF09: Software for dynamic or static axle weighing with 1 or 2 pads (optional)
• BATCH1: Single product dosage systems in loading and unloading (optional)
• BATCH: Software for multicomponent dosage systems in loading and unloading (optional, requires IOEXPB expansion board)

I/O section

• 1 Internal serial ETHERNET port, for connection to the company computer system (excludes a serial port).
• 2 RS232 serial ports on terminals, for connection to printer, PC, radio module and optional interfaces.
• 1 RS485/RS232 serial port on terminals, for connection to weight repeater,remote scale, badge readers or digital load cells.
• 4 serial optoisolated outputs, up to 16 with optional board.
• 2 serial optoisolated inputs, up to 8 with optional board.
• External Profibus interface (optional), for automation management.
• Modbus RTU interface.
• Optional Bluetooth connection, for fast wireless programming of archives, via PC, tablet or smartphone.
• Analog output DAC16O requires IOEXPB expansion board.

Customizable displays

• Thanks to the programmable Touch Screen display, it is possible to create the interface tailored to each application:
• The PC software "Dini Display Tool" allows for the quick customisation of the TOUCH display.

Main certifications

• EU Type Examination Certificate (45501:2015)
• OIML R76
• OIML R51 - MID
• OIML R134 (AF09)
• EN/IEC 60079-0
• EN/IEC 60079-11 (ZB version)
• EN/IEC 60079-15
• EN/IEC 60079-31
• Certification according to ATEX directive 2014/34/EU and in compliance with IECEx scheme, group II category 3GD according to EN/IEC 60079-0, EN/IEC 60079-11, EN/IEC 60079-15, EN/IEC 60079-31.

Available on estimate

• Power supply 24 Vdc.
• PG13,5 anti-friction cable glands with adapters for the passage of cables from 5,5 to 8 mm and from 10,5 to 13 mm.